e-Brochure

Oxibond SBR

Oxibond SBR is a modified styrene butadiene emulsion based bonding aid and additive for mortars, screeds and renders, which is supplied as a ready to use white liquid. It is designed to improve the quality of site-batched cementitious mortars and slurries. Being resistant to hydrolysis (unlike PVA-based bonding system) it will perform very well under humid conditions and other applications subject to continuous and / or alternate wetting and drying. Used in:

  • Polymer modified floor screens.
  • Levelling courses patching / repair mortars.
  • Bonding slurries.
  • Waterproof screens.
  • Thick bed mortar for setting tiles, bricks, marble stones, and ceramics.
  • Polymer concrete overlays for highways and bridges.
 

TDS MSDS

Oxibond EP

Oxibond EP is based on solvent-free epoxy resins containing pigments and fine fillers. It is supplied as a two-component material in pre-weighed quantities ready for on-site mixing and use. The base component is white and the hardener component is green, providing visual evidence that adequate mixing has been achieved.

  • Note: Oxibond EPFS (Fast Set); suitable for cold weather working, can be made available when specifically requested.
Oxibond EP is used or bonding fresh wet cementitious materials to existing cementitious surfaces. For use on horizontal surfaces or on vertical surfaces where mortar or concrete can be supported by formwork. The long ‘open’ life makes it suitable for use with formwork or where additional steel reinforcement has to be fitted. The product is ideal for roads, bridges, pavements, loading bays and factories, and for bonded or granolithic floor toppings.
  • Oxibond EP is equally suited to internal and external applications.

TDS MSDS

Oxibond PVA

OXIBOND PVA is a polyvinyl acetate bonding agent with a long history of successful usage in many varying building situations. It is a multi-purpose material that can be used both as a straightforward bonding agent, a surface sealer and / or an admixture in cement-based mixes – to be used in dry areas not subject to rinsing or continual dampness. in wet areas use Oxibond SBR.

  • Used as  an adhesive for most common building materials. Bonding agent for internal renderings, floor toppings, key plaster, cement screed, etc. For general concrete repair and sealing of concrete.

TDS MSDS

Oxibond AR

OXIBOND AR is a single component, acrylic polymer based emulsion, designed as an admixture for cementitious mortars and screeds and as a bonding and curing agent for concrete and patch repairs, in wet areas use Oxibond SBR.  

  • Used as an adhesive for most common building materials. Bonding agent for internal renderings, floor toppings, key plaster, cement screed, etc. For general concrete repair and sealing of concrete.

TDS MSDS