Oxifill FC
(Formerly known as Oximortar FC)
OXIFILL FC is a solvent free, high performance, non-slumping epoxy mortar and high adhesive Putty. OXIFILL FC is designed for application to repair imperfections in concrete surfaces. It is suitable for application from a featheredge to 3 mm, and can be used in the following areas:- Repairing surface defects in concrete in horizontal, vertical and overhead applications.
- Sealing of surface cracks in crack injection
- Bonding of dowels, bolts and anchors into concrete.
- Rapid structural repair of concrete and metals
Oxifill FCF
(Formerly known as Oximortar FCF)
High Strength epoxy bedding and Fair coat adhesive (Fast set) OXIFILL FCF is designed for application to repair imperfections in concrete or metal surfaces where rapid curing is needed. It is suitable for application from a featheredge to 3 mm, and can be used in the following situations:- Repairing surface defects in concrete in horizontal, vertical and overhead applications.
- Sealing of surface cracks in crack injection
- Rapid structural repair of concrete.
- Repair of metal surface
Oximortar S
Solvent free epoxy reinstatement mortar, can be applied in sections up to 50 mm thickness in horizontal locations or up to 12 mm thickness in vertical locations in a single application. For fast and permanent patch repair of concrete, particularly where high strength, abrasion and chemical resistance is required. It is ideally suited for: • Marine applications • Polymer modified floor screens. • Sewage tanks • Sea walls • Industrial floors • Use as a bedding mortar
Oxifill FCB
(Formerly known as Oximortar FCB)
Epoxy resin fairing coat and blow hole filler OXIFILL FC(B) is designed for application to blow holes and surface imperfections in concrete surfaces. It is suitable for application thicknesses greater than 3mm, and can be used in the following situations:- Low VOC and non-shrink
- Filling blow holes prior to overcoating.
- General reprofiling over large areas up to a thickness of 5 mm.