PG Grade Road Bitumen

  • 30/40
  • 40/50
  • 60/70
  • 80/100

Road work bitumen products according with global standard completely meet ASTM Specification. Its high quality ensures its excellent durability under extreme weather and traffic condition. AL Majara Bitumen pen grade product is suitable material for paving expressway, highway, urban road and parking area, as well as bridge deck. Also penetration grade can be good base bitumen for high quality emulsion production.

PG Grade Road Bitumen
Bitumen Emulsion (Anionic & Cationic)

Bitumen Emulsion (Anionic & Cationic)

  • RS-1, RS-2, MS-1, MS-2
  • SS-1, SS1-H [ASTM D 977-98]
  • CRS-1, CRS-2, CM, CSS-2 [ASTM D 2397-98 and IS:8887]

Advanced formulation and premium base bitumen, together with standard plant management, made a dream come true – the first high standard road emulsion commercial supplier starts working. Emulsion changes local road paving and maintenance operation into a environmental, energy saving, flexible andenjoyable job. Al Majara Bitumen Emulsions has a full product range, including products specially designed for tack coat, prime seal, and cold mix etc

Cutback Bitumen (Medium & Rapid)

Rapid Curing Cutback Bitumen Medium Curing Cutback Bitumen

  • RC-70 MC-30
  • RC-250 MC-70
  • RC-3000 MC-3000

Cutback Bitumen (Liquid Bitumen) is Bitumen that is dissolved in a solvent. Typical solvents include Naphtha, gasoline and kerosene, white spirit etc. The type of solvent controls the curing time while the amount determines the viscosity of the Cutback Bitumen.

The advantage Cutbacks have over Emulsions is a much higher residual Bitumen percent, typically over 80% compares with over 40-65% for Bitumen emulsions. The result is more Bitumen left on the roadway after curing, for the same volume of binder applied.

Cutback Bitumen (Medium & Rapid)
Penetration Grades Polymer Modified Bitumen (PMB)

Penetration Grades Polymer Modified Bitumen (PMB)

A range of PG grade binders complying with AASHTO M320 is available, the selection of which depends on climatic variation in different countries. Al Majara’s expertise and know-how from many years of international supply using a variety of bitumen sources with different binder modifiers including polymers when appropriate to achieve the required properties.

Continents like _minus climates suitable grades – PG 64-16
Continents like +50 Tropical climates suitable grades, – PG 76- 22

Polymer Modified Bitumen (PMB)

Al Majara expertise across the Middle East region complying to different specifications for PMB asphalt binders on major infrastructure projects with special focus on binder performance in the Middle East climate PG 82-22 ,PG 76-22 / PG 76-1 OE International Airports
PMB standard specifications:
AASHTO M320 using state-of-art hybrid polymer technology
AASHTO M332-14 using hybrid polymer technology to meet the full range of PMB asphalt binders graded by performance, using the multiple stress creep recovery (MSCR) test. Grading designations are related to the average seven-day maximum pavement design temperature, minimum pavement design temperature, and traffic loading. This specification incorporates T 350 for determining non-recoverable creep compliance, Jnr. “S,” “H,” “V,” or “E” designations are specified for standard,
high, very high, or extremely high traffic loading, respectively. EN 14023 using elastomeric hybrid binders designed to suit climatic conditions and complying with the European Specification Framework for PMB. SPECIAL ‘PMB’ grades which are bespoke polymer modified bitumen grades designed to meet project-specific requirements.

Polymer Modified Bitumen (PMB)
Oxidation Bitumen

Oxidation Bitumen

  • 85/25
  • 90/15
  • 95/25
  • 115/15
  • 135/10
  • 120/5
  • 110/30

High-tech product is obtained by special refining process without any polymer modification. Its property increased dramatically, far better than conventional bitumen while its cost is lower than PMB. This category includes those Grades, which are manufactured by straight run oxidation and Fluxing process in our specially designed equipment for the same purpose.

Al Majara Bitumen industrial product plant located in Sharjah Industrial area, providing industrial products including roofing, protection, waterproofing and other sealants.

Cutback Classification
Cutbacks are divided into two classifications, Rapid-Curing (RC) and solvent used. They are further defined by a number that indicates the minimum kinematic viscosity (fluidity) of the cutback.

Ready Mix (Cooled mix)

INSTANT ROAD REPAIRIRR is a product used for the repairing of cracks Depressions Broken Areas of any size, shape or depth in concrete on motorways, highways, car parks, playground, etc.

Water proofing Bitumen

  • Solvent Primer D-41
  • Water Prime WB
  • Black Bitumen Paint
  • Fibrated Bitumen Emulsion
  • Rubberized Bitumen Emulsion
  • Bitumen Mastic Sealant
Ready Mix (Cooled mix)