Pen Grade Road Bitumen
Road work bitumen products according with global standard completely meet ASTM Specification. Its high quality ensures its excellent durability under extreme weather and traffic condition. AL Majara Bitumen pen grade product is suitable material for paving expressway, highway, urban road and parking area, as well as bridge deck. Also penetration grade can be good base bitumen for high quality emulsion production.
Bitumen Emulsion (Anionic & Cationic)
• RS-1, RS-2, MS-1, MS-2
• SS-1, SS1-H [ASTM D 977-98]
• CRS-1, CRS-2, CM, CSS-2 [ASTM D 2397-98 and IS:8887]
Advanced formulation and premium base bitumen, together with standard plant management, made a dream come true – the first high standard road emulsion commercial supplier starts working. Emulsion changes local road paving and maintenance operation into a environmental, energy saving, flexible and enjoyable job. Al Majara Bitumen Emulsions has a full product range, including products specially designed for tack coat, prime seal, and cold mix etc.
High-tech product is obtained by special refining process without any polymer modification. Its property increased dramatically, far better than conventional bitumen while its cost is lower than PMB. This category includes those Grades, which are manufactured by straight run oxidation and Fluxing process in our specially designed equipment for the same purpose.
Al Majara Bitumen industrial product plant located in Sharjah Industrial area, providing industrial products including roofing, protection, water proofing and other sealant.
Cutbacks are divided into two classifications, Rapid-Curing (RC) and Medium-Curing (MC) depending on the solvent used. They are further defined by a number which indicates the minimum kinematic viscosity (fluidity) of the cutback.
Cutback Bitumen (Medium & Rapid)
Rapid Curing Cutback Bitumen Medium Curing Cutback Bitumen
• RC-70 MC-30
• RC-250 MC-70
• RC-3000 MC-3000
Cutback Bitumen (Liquid Bitumen) is Bitumen that is dissolved in a solvent. Typical solvents include Naphtha, gasoline and kerosene, white spirit etc. The type of solvent controls the curing time while the amount determines the viscosity of the Cutback Bitumen.
The advantage Cutbacks have over Emulsions is a much higher residual Bitumen percent, typically over 80% compares with over 40-65% for Bitumen emulsions. The result is more Bitumen left on the roadway after curing, for the same volume of binder applied.
Ready Mix (Cooled mix)
INSTANT ROAD REPAIRIRR is a product used for the repairing of cracks Depressions Broken Areas of any size, shape or depth in concrete on motorways, highways, car parks, playground, etc.
Water proofing Bitumen
• Solvent Primer D-41
• Water Prime WB
• Black Bitumen Paint
• Fibrated Bitumen Emulsion
• Rubberized Bitumen Emulsion
• Bitumen Mastic Sealant
• 15 liter pails
• 20 liter pails
• 140 liter drums
• 200 liter drums
• Based on Customer Request